900/800 deg. Atmosphere Sintering Reduction Oven With Clean Stainless Steel Chamber

900/800 deg. Atmosphere Sintering Reduction Oven

Warranty:One year warranty, lifetime technical support;
Note: Consumable parts such as heating elements, sample crucibles, etc. are not covered by the warranty, and damage caused by the use of corrosive gases or materials is not covered by the warranty.

Operating Notes:

1. For safety, please put the stove in a ventilated place.
2. In order to improve the service life of the furnace, we recommend that the heating rate should not exceed 10°C/min. The cooling rate does not exceed 5°C/min.
3. The furnace has no vacuum tightness, and it is forbidden to pass toxic or explosive gases
4. It is forbidden to put the materials directly on the bricks at the bottom of the furnace, please put the materials in the special crucible.
5. When heating, the material and crucible should not touch the heating element and thermocouple
6. If not used for a long time, please bake the oven before using it again.

Detailed description:

• Electric resistance wire and Chamber :                                                                                                                                                                  Kanthal A1 resistance wire:     ;                                                                                                                                Characteristics of Kanthal A1 resistance wire:
  (1) The surface temperature is as high as 1420℃
  (2) The surface is stainless steel color (very bright), will not rust, and will not drop slag after long use.
  (3) Balanced resistance and good temperature field balance.                                                                                                                Domestic resistance wire chamber:   ，Regular Fe-Cr-Al Alloy doped by Mo resistance wire, its heating area:  ;                                                                                                                                                                                  Imported resistance wire chamber: , Kanthal A1 resistance wire has uniform resistance, even heat generation, and better temperature field effect， its heating Area : .
• It can be connected to the computer.                                                                                                                                                                    The furnace is equipped with communication interface and software, which can directly control the various parameters of the furnace through the computer, and can observe the PV and SV temperature values on the furnace and the operation of the instrument from the computer. The actual temperature rise curve of the furnace will be drawn by the computer in real time. And it can save the temperature data at each moment, and it can be recalled at any time.                             
• Installed with air switch and leakage protector:
  When the circuit is over-current or leakage, the switch is automatically disconnected.   
• Chamber :                                                                                                                          1. High-quality and high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.                               2. Using Japanese technology to form.
  3. The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated by thermal software
  4. Adopt 4-sided heating (left and right top three sides), the temperature field is more balanced
• Optional UL certification electrical board (all imported electrical appliances that have passed UL certification) 
• Certification：  UL, SA, TUV are ready to be certified, additional costs are required.                                                                                                       

STANDARD ACCESSORIES 1200.C

OPTIONAL ACCESSORIES:

• Optional 1.) Explosion-proof system: Explosion-proof system is composed of solenoid valve, microcomputer, pressure display and transmitter, 24V power supply, AC contactor, etc. The pressure in the furnace is converted into an electric signal through the pressure display and transmitter and transmitted to the microcomputer. The microcomputer compares with the set value, and then gives a signal to control the AC contactor, thereby controlling the opening and closing of the solenoid valve. When the pressure in the furnace is greater than the allowable pressure set by us, the solenoid valve will open immediately to play an anti-explosion effect. We have installed an air outlet pipe on the solenoid valve, and the user can connect the pipe to exhaust the gas outdoors, and the explosion-proof valve is one-way The valve can only exhaust gas, not return flow, which effectively guarantees the safety of the furnace.
  The explosion-proof system has many advantages:
  (1) Reusability: The solenoid valve opens when the pressure is greater than the set value, and closes when the pressure is lower than the set value. Unlike a mechanical riot control device, it cannot be used once it bursts.
  (2) The setting value is adjustable: the user can adjust the opening pressure of the solenoid valve through the microcomputer as needed.
  (3) The explosion-proof point is very sensitive: because the microcomputer and electric signal are used, it will detonate immediately when the pressure reaches the explosion-proof point.
  (4) Explosion-proof system safety: no fragments fly out during detonation. (If a mechanical type is used, the glass may fly out).
  (5) The explosion-proof system has good stability: because of the use of microcomputers and solenoid valves, it will detonate at our set point, and users can test it. Unlike the mechanical type that cannot be tested, there are many differences in whether the explosion-proof point will open or not. Certainty.
• Optional 2.) Under-pressure alarm system: When the furnace pressure is lower than a standard atmospheric pressure (the pressure value is adjustable), the electric furnace will automatically alarm to indicate that the intake air flow is insufficient, and can decide whether to cut off the heating circuit according to the needs of customers power supply.
• Optional 3.) Gas supply system: The furnace can be equipped with 2 or 3 float flow meters, which can control the gas flow rate. Each inlet has a stainless steel valve. You can choose one of them or Several channels are used to adjust the gas. The gas enters the gas mixing tank after passing through the flow meter, and then enters the furnace body in 3 channels, so that the gas can flow into the furnace body evenly.
• Optional 4.) Vacuum system: The atmosphere box furnace can be pre-evacuated to speed up the cleaning of the air in the furnace.
• Optional 5.) Combustion device: The furnace can be equipped with a hydrogen burner to burn the gas discharged from the furnace.
• Optional 6.) Water cooling system: The furnace is equipped with a water cooler, which can automatically cool the road entrance.