1400/1350 Degree Anti-corrosion Atmosphere Furnace Sintering Lithium Battery Ternary Materials

1400/1350 Degree Anti-corrosion Atmosphere Furnace

Maximum operating temperature in various atmospheres- 1400 deg. atmosphere furnace

Warranty:One year warranty, lifetime technical support;
Note: Consumable parts such as heating elements, sample crucibles, etc. are not covered by the warranty, and damage caused by the use of corrosive gases or materials is not covered by the warranty.

Operating Notes:

1. For safety, please put the stove in a ventilated place.
2. In order to improve the service life of the furnace, we recommend that the heating rate should not exceed 10°C/min. The cooling rate does not exceed 5°C/min.
3. The furnace has no vacuum tightness, and it is forbidden to pass toxic or explosive gases
4. It is forbidden to put the materials directly on the bricks at the bottom of the furnace, please put the materials in the special crucible.
5. When heating, the material and crucible should not touch the heating element and thermocouple
6. If not used for a long time, please bake the oven before using it again.

Detailed description:

• Heating Elements :                                                                                                                                                        (1) The thickness d of the hot end of the silicon carbide rod is 14mm (12MM used by general manufacturers). The heating end is thick, not easy to bend, the surface load of the rod is low, and the service life is long.
  (2) m cold end length is 210mm (generally manufacturers use 180mm), the cold end long furnace top temperature is low.
  (3) The oxidized amorphous film on the surface of the silicon carbide rod is dense, which can better protect the carbon rod.
• Installed with air switch and leakage protector:
  When the circuit is over-current or leakage, the switch is automatically disconnected.   
• It can be connected to the computer.                                                                                                                                The furnace is equipped with communication interface and software, which can directly control the various parameters of the furnace through the computer, and can observe the PV and SV temperature values on the furnace and the operation of the instrument from the computer. The actual temperature rise curve of the furnace will be drawn by the computer in real time. And it can save the temperature data at each moment, and it can be recalled at any time.                             
• Chamber :                                                                             1. High-quality and high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.
  2. Using Japanese technology to form.
  3. The furnace material has low heat capacity and low thermal conductivity, resulting in less heat dissipation, good heat preservation and high reflectivity. The temperature field is balanced.
  4. The furnace alumina wire is thin and long, has high temperature resistance, and has strong resistance to thermal expansion and contraction.
  5. The surface of the furnace is smooth and not easy to drop powder.
• Optional UL certification electrical board (all imported electrical appliances that have passed UL certification) 
• Certification：  UL, SA, TUV are ready to be certified, additional costs are required.                                           

STANDARD ACCESSORIES 1400/1300 degree

1.  Temperature Controller:                                                                                                                                                                                                                                                                                                                                                     Regular by Yudian controller, other Brand- SHIMADEN / EUROTHERM or touch screen ones optional.